Matlab 条形图绘制 以及 添加误差棒 改变条形图形状

首先绘制条形图 主要采用matlab自带的bar命令

a_live = [0.9186, 0.9460, 0.9552, 0.9533]; a_tid = [0.6090, 0.6663, 0.7170, 0.7165]; a = [a_live; a_tid]; bar(a, 'grouped') set(gca,'YLim', [0.5,1], 'XTickLabel',{'LIVE', 'TID2013'}, 'FontSize', 15); ylabel('SRC'); set(gca, 'Ytick', [0.5:0.05:1], 'ygrid','on','GridLineStyle','-'); legend('25','50','100','200', 'Location', 'EastOutside'); legend('boxoff');

采用errorbar命令添加误差棒，这里的误差是标准差。

e = [0.0198, 0.0124, 0.0096, 0.0112; 0.0875, 0.0990, 0.1034, 0.0939]; hold on numgroups = size(a, 1);  numbars = size(a, 2);  groupwidth = min(0.8, numbars/(numbars+1.5)); for i = 1:numbars       % Based on barweb.m by Bolu Ajiboye from MATLAB File Exchange       x = (1:numgroups) - groupwidth/2 + (2*i-1) * groupwidth / (2*numbars);  % Aligning error bar with individual bar       errorbar(x, a(:,i), e(:,i), 'k', 'linestyle', 'none', 'lineWidth', 1); end

最后采用一个toolbox： applyhatch_pluscolor_bundle来改变条形图的形状，方便黑白打印的时候显示

[im_hatch,colorlist] = applyhatch_pluscolor(1,'\+x.', 1, [1,0,1,0] , [], [], 1.5, 2); % add different patterns

———————————————— 版权声明：转载仅作为笔记使用。本文为CSDN博主「raul678」的原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接及本声明。 原文链接：https://blog.csdn.net/raul678/article/details/50344755