怎么在CentOS中使用ethtool命令 | 您所在的位置:网站首页 › ethtool命令怎么用 › 怎么在CentOS中使用ethtool命令 |
怎么在CentOS中使用ethtool命令
发布时间:2021-03-15 16:56:01
来源:亿速云
阅读:463
作者:Leah
栏目:系统运维
专为编程打造,自动写代码机器人,免费开通
今天就跟大家聊聊有关怎么在CentOS中使用ethtool命令,可能很多人都不太了解,为了让大家更加了解,小编给大家总结了以下内容,希望大家根据这篇文章可以有所收获。 ethtool 是用于查询及设置网卡参数的命令。 使用概要: ethtool ethx //查询ethx网口基本设置,其中 x 是对应网卡的编号,如eth0、eth2等等 ethtool –h //显示ethtool的命令帮助(help) ethtool –i ethX //查询ethX网口的相关信息 ethtool –d ethX //查询ethX网口注册性信息 ethtool –r ethX //重置ethX网口到自适应模式 ethtool –S ethX //查询ethX网口收发包统计 ethtool –s ethX [speed 10|100|1000] [duplex half|full] [autoneg on|off] //设置网口速率10/100/1000M、设置网口半/全双工、设置网口是否自协商 使用举例: 1)[root@linux /]# ethtool eth2 Settings for eth2: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: d Link detected: yes 2)[root@linux /]# ethtool -i eth2 driver: e1000 version: 5.0.43-k1 firmware-version: N/A bus-info: 06:08.1 3)[root@linux /]# ethtool -S eth2 NIC statistics: rx_packets: 58068300 tx_packets: 87124083 rx_bytes: 1589713008 tx_bytes: 2165825901 rx_errors: 0 tx_errors: 0 rx_dropped: 0 tx_dropped: 0 multicast: 0 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_fifo_errors: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 4)[root@linux /]# ethtool -s eth2 autoneg off speed 100 duplex full 相关参考: 1)[root@linux /]# which ethtool //查询 ethtool 存放的路径 /sbin/ethtool 2)[root@linux /]# rpm -qf /sbin/ethtool //查询 ethtool 的版本信息 ethtool-1.6-5 3)将 ethtool 设置永久保存在网络设备的方法 解决方法一: ethtool 设置可通过 /etc/sysconfig/network-scripts/ifcfg-ethX 文件保存,从而在设备下次启动时激活选项。 例如:ethtool -s eth0 speed 100 duplex full autoneg off 此指令将eth0设备设置为全双工自适应,速度为100Mbs。若要eth0启动时设置这些参数, 修改文件/etc/sysconfig/network-scripts/ifcfg-eth0 ,添加如下一行: ETHTOOL_OPTS="speed 100 duplex full autoneg off" 解决方法二: 将ethtool设置写入/etc/rc.d/rc.local之中。 看完上述内容,你们对怎么在CentOS中使用ethtool命令有进一步的了解吗?如果还想了解更多知识或者相关内容,请关注亿速云行业资讯频道,感谢大家的支持。 向AI问一下细节 推荐阅读: 使用linux的ethtool命令查询与设置网卡参数 mail命令怎么在Centos系统中使用免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:[email protected]进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。 centos ethtool 上一篇新闻:怎么在CentOS中使用egrep命令 下一篇新闻:如何在linux中使用mount命令 猜你喜欢 如何在云服务器建立ftp服务器端 linux如何查看CDN服务是否开启 数据通道加密措施有哪些 kettle传输数据如何加密 ip反向域名解析有什么用 香港的服务器购买了怎么登录 静态域名解析和动态域名解析有什么区别 怎么删除cdn上资源 用Python解微分方程用什么函数 香港服务器怎么免备案 |
CopyRight 2018-2019 实验室设备网 版权所有 |