[unoffical] LE

Hello !

I have TV-box with board "T95N-RK3229_512X4-20170803_V1.5" , RK3229, 2G DDR3 RAM,16GB eMMC, and RTL8703BS WiFi

I try images from Release Kodi 18.6 / add more supported devices · knaerzche/LibreELEC.tv · GitHub

1. TANIX TX2, DDR3, RTL8703 Wifi -LibreELEC-RK322x.arm-9.2-devel-20200301144541-b58333a-rk3229-tx2.img.gz

Wifi works, MAC changed after reboot. Ethernet work.

But Wifi connection is not saved, after reboot you have to configure again.

2. D88 HDMI Stick - DDR3, RTL8723 Wifi (SDIO Package), NAND, no ethernet - LibreELEC-RK322x.arm-9.2-devel-20200301144132-b58333a-rk3229-d88.img.gz

Wifi works , MAC changed after reboot. Ethernet work.

But Wifi connection is not saved, after reboot you have to configure again.

In my opinion, due to the fact that the MAC is changied after reboot and the saved settings in /storage/.cache/connman are tied to the previous one.

After four reboot/configure WiFi we have four configs connman

LibreELEC:~/.cache/connman # ls

ethernet_860a7a439d4c_cable settings

wifi_00e04c11a6a0_54502d4c696e6b_managed_psk

wifi_00e04c18e30b_54502d4c696e6b_managed_psk

wifi_00e04c9f7077_54502d4c696e6b_managed_psk

wifi_00e04cd13a80_54502d4c696e6b_managed_psk

LED with these images is always on.

3. HK1 mini - DDR3, SSV6051 Wifi, NAND - LibreELEC-RK322x.arm-9.2-devel-20200301144255-b58333a-rk3229-hk1mini.img.gz

LED works correctly, but no WiFi.

I try edit rk3229-box-d88.dtb , replace section led from hk1mini.dtb

leds {

compatible = "gpio-leds";

led_red {

gpios = ;

default-state = "off";

linux,default-trigger = "rc-feedback";

};

led_blue {

gpios = ;

default-state = "on";

};

};

But no effect.

Q1. What else needs to be done?

Q2. And another question can I make Wakeup/PowerOn with an IR remote control?

With firmware HK1 mini (for look IR activity)

I try in /storage/.config/rc_keymaps/my_rc

0x57 KEY_POWER or

0x57 KEY_SUSPEND and

0x57 KEY_SLEEP

i have one result - box is power OFF

but 0x59 KEY_WAKEUP also shudown the tv-box

I don't understand , what am I doing wrong